Development of biodegradation process for Poly(DL-lactic acid) degradation by crude enzyme produced by Actinomadura keratinilytica strain T16-1

Background: Plastic waste is a serious problem because it is difficult to degrade, thereby leading to global environment problems. Poly(lactic acid) (PLA) is a biodegradable aliphatic polyester derived from renewable resources, and it can be degraded by various enzymes produced by microorganisms. This study focused on the scale-up and evaluated the bioprocess of PLA degradation by a crude microbial enzyme produced by Actinomadura keratinilytica strain T16-1 in a 5 L stirred tank bioreactor. Results: PLA degradation after 72 h in a 5 L bioreactor by using the enzyme of the strain T16-1 under controlled pH conditions resulted in lactic acid titers (mg/L) of 16,651 mg/L and a conversion efficiency of 89% at a controlled pH of 8.0. However, the PLA degradation process inadvertently produced lactic acid as a potential inhibitor, as shown in our experiments at various concentrations of lactic acid. Therefore, the dialysis method was performed to reduce the concentration of lactic acid. The experiment with a dialysis bag achieved PLA degradation by weight loss of 99.93%, whereas the one without dialysis achieved a degradation of less than approximately 14.75%. Therefore, the dialysis method was applied to degrade a commercial PLA material (tray) with a conversion efficiency of 32%, which was 6-fold more than that without dialysis. Conclusions: This is the first report demonstrating the scale-up of PLA degradation in a 5 L bioreactor and evaluating a potential method for enhancing PLA degradation efficiency.

Poly(DL-lactide)-degrading enzyme production by immobilized Actinomadura keratinilytica strain T16-1 in a 5-L fermenter under various fermentation processes

Background: Poly(DL-lactic acid), or PDLLA, is a biodegradable polymer that can be hydrolyzed by various types of enzymes. The protease produced by Actinomadura keratinilytica strain T16-1 was previously reported to have PDLLA depolymerase activity. However, few studies have reported on PDLLA-degrading enzyme production by bacteria. Therefore, the aims of this study were to determine a suitable immobilization material for PDLLA-degrading enzyme production and optimize PDLLA-degrading enzyme production by using immobilized A. keratinilytica strain T16-1 under various fermentation process conditions in a stirrer fermenter. Results: Among the tested immobilization materials, a scrub pad was the best immobilizer, giving an enzyme activity of 30.03 U/mL in a shake-flask scale. The maximum enzyme activity was obtained at aeration 0.25 vvm, agitation 170 rpm, 45°C, and 48 h of cultivation time. Under these conditions, a PDLLA-degrading enzyme production of 766.33 U/mL with 15.97 U/mL·h productivity was observed using batch fermentation in a 5-L stirrer fermenter. Increased enzyme activity and productivity were observed in repeated-batch (942.67 U/mL and 19.64 U/mL·h) and continuous fermentation (796.43 U/mL and 16.58 U/mL·h) at a dilution rate of 0.013/h. Scaled-up production of the enzyme in a 10-L stirrer bioreactor using the optimized conditions showed a maximum enzyme activity of 578.67 U/mL and a productivity of 12.06 U/mL·h. Conclusions: This research successfully scaled-up the enzyme production to 5 and 10 L in a stirrer fermenter and is helpful for many applications of poly(lactic acid).

A simple and efficient method for poly-3-hydroxybutyrate quantification in diazotrophic bacteria within 5 minutes using flow cytometry

The conventional method for quantification of polyhydroxyalkanoates based on whole-cell methanolysis and gas chromatography (GC) is laborious and time-consuming. In this work, a method based on flow cytometry of Nile red stained bacterial cells was established to quantify poly-3-hydroxybutyrate (PHB) production by the diazotrophic and plant-associated bacteria, Herbaspirillum seropedicae and Azospirillum brasilense. The method consists of three steps: i) cell permeabilization, ii) Nile red staining, and iii) analysis by flow cytometry. The method was optimized step-by-step and can be carried out in less than 5 min. The final results indicated a high correlation coefficient (R2=0.99) compared to a standard method based on methanolysis and GC. This method was successfully applied to the quantification of PHB in epiphytic bacteria isolated from rice roots.

Comparing the osteogenic potential of canine mesenchymal stem cells derived from adipose tissues, bone marrow, umbilical cord blood, and Wharton's jelly for treating bone defects

Alternative sources of mesenchymal stem cells (MSCs) for replacing bone marrow (BM) have been extensively investigated in the field of bone tissue engineering. The purpose of this study was to compare the osteogenic potential of canine MSCs derived from adipose tissue (AT), BM, umbilical cord blood (UCB), and Wharton's jelly (WJ) using in vitro culture techniques and in vivo orthotopic implantation assays. After canine MSCs were isolated from various tissues, the proliferation and osteogenic potential along with vascular endothelial growth factor (VEGF) production were measured and compared in vitro. For the in vivo assay, MSCs derived from each type of tissue were mixed with beta-tricalcium phosphate and implanted into segmental bone defects in dogs. Among the different types of MSCs, AT-MSCs had a higher proliferation potential and BM-MSCs produced the most VEGF. AT-MSCs and UCB-MSCs showed greater in vitro osteogenic potential compared to the other cells. Radiographic and histological analyses showed that all tested MSCs had similar osteogenic capacities, and the level of new bone formation was much higher with implants containing MSCs than cell-free implants. These results indicate that AT-MSCs, UCB-MSCs, and WJ-MSCs can potentially be used in place of BM-MSCs for clinical bone engineering procedures.

Isolation and identification of poly beta hydroxybutyric acid accumulating bacteria of Staphylococcal sp. and characterization of biodegradable polyester.

Staphylococcus sp. strain BP/SU1, capable of degrading the biopolymer and utilize it as a source of carbon and energy, was isolated from activated sludge using METABOLIX (MBX D411G). It was found that this strain was capable of accumulating poly(3-hydroxybutyric acid) P(3-HB), as granule poly (3-hydroxybutyric acid), p(3-HB), inclusion bodies when grown under suitable nutrient conditions. These strains could sustain cell growth up to a dry mass of 9.24 g/l with a doubling time of 8 to 10 hr and could accumulate P(3-HB) as granular inclusion bodies to a cell dry weight of more than 12%. P(3-HB) accumulated by this organism was isolated and characterized through NMR, FT-IR spectroscopy, UV Spectroscopy, Mass spectroscopy and Differential Scanning Calorimetry. P(3-HB) granules so isolated showed physical and chemical properties that should be possessed by a superior quality thermoplastic biopolymer.

Tissue engineering of cartilage with porous polycarprolactone--alginate scaffold: the first report of tissue engineering in Thailand.

OBJECTIVE: To engineer human cartilage with porous polycaprolactone (PCL)-Alginate Scaffold. BACKGROUND: Polycaprolactone (PCL) is a prolonged degradable polymer that has good mechanical strength. The authors fabricated PCL as an ear shaped scaffold. Alginate hydrogel was used to seed chondrocyte into the PCL porous scaffold by a gel-cell seeding technique. MATERIAL AND METHOD: PCL Scaffolds were fabricated like human pinna by particle leaching technique. Chondrocyte was isolated from human rib cartilage and then cultured. The cultured chondrocyte were mixed with 1.2% alginate and b-FGF (basic-fibroblast growth factor) 5 ng/ml at a concentration of 25 x 10(6) cell/ml, then were seeded in porous PCL scaffold to make the constructs. The constructs were cultured in vitro for 1 week. Then they were implanted in subcutaneous plane of the back of six-female nude mice (5 weeks old). Two nude mice were sacrificed at 2, 3, and 6 months. Histological study was done (H&E, Alcian blue, collagen type II). RESULT: Neocartilage was formed in the porous cavity of PCL scaffold. At 2 and 3 months, neocartilage were similar to very young cartilage. At 6 months, they were mature. The delayed maturation until 6 months and the highly vascularization of neocartilage in the early phase was the effect of human b-FGF The growths of neocartilage islands in porous cavity were also observed along with degradation ofPCL inter-porous septum. CONCLUSION: This paper reports the first success of cartilage tissue engineering in Thailand.

Growth-associated production and characterization of poly (3-hydroxybutyric acid) of Azotobacter beijerinckii DAR-102.

Production of poly (3-hydroxybutyric acid) [P(3HB)] by Azotobacter beijerinckii DAR-102 isolated in this laboratory has been optimized under batch-culture. The accumulatad polymer attained 58% of cell dry mass during mid-stationary phase with an yield of 0.58 g/l when grown in nitrogen-free medium. The optimum concentration of glucose and fructose for P(3HB) production was 3% (w/v) and 2% (w/v) respectively while that of casamino acid and tryptose was 0.1% (w/v). Phosphate at a concentration suboptimal for growth and limitation of oxygen in the medium favoured P(3HB) accumulation. The production of P(3HB) was maximum with an inoculum dose of 4% (v/v). The accumulated polymer was isolated by direct chloroform extraction of the dry cell mass and purified by precipitation with diethyl ether. The purified polymer has been characterized in terms of its solubility properties, melting temperature, and UV-, IR- and NMR-spectroscopic analyses.

Enriquecimiento en mutantes de Bacillus megaterium deficientes en la síntesis de poli-ß-hidroxibutirato (PHB) / Enrichment for mutants of Bacillus megaterium deficient in the synthesis of poly-ß-hydroxybutyrate (PHB)

La centrifugación en gradientes de sacarosa permite la separación de células según su densidad boyante de acuerdo al contenido en poli-ß-hidroxibutirato (PHB). En este trabajo este método se evaluó y se adaptó para detectar mutantes deficientes en la síntesis de PHB de B. megaterium analizando un bajo porcentaje de la población mutagenizada